Vertical Boat Lifts
FLOE’s vertical boat lifts and pontoon boat lifts accommodate watercraft ranging from 2,000 to 10,000 lbs. The bolt-together design uses lock-nuts to keep the frame components tight and eliminates structural welds that can wear out and fatigue over time. The sturdy V-brace frame design is the most rigid available while still allowing easy access to the boat. The main cradle beam lowers to 9.5 inches from the ground, allowing for smooth operations in less water than other vertical boat lifts.
Vertical Boat Lifts
FLOE’s VSD (Vertical Screw Drive) technology lowers and raises your boat or pontoon in about one-half the time of most other powered boat lifts. It’s the most energy-efficient vertical boat lift in the world. The drive train is whisper quiet with no clicking winch gears or pinging cable.
The low-maintenance electric motor spins the screw so the ball nut travels back and forth as it pulls the lifting cable. The industrial strength ball-screw is rated for 20,000 cycles at 10,000 lbs. No need to ever replace a worn winch cable with a VSD boat lift!
Quickly raise and lower your boat with the push of a button using FLOE’s Wired Remote. The 30-foot cord makes it convenient to position anywhere on the boat lift and has a key switch so you can turn off your lift when you are not at the lake.
Add an optional Wireless Remote to operate your boat lift from a distance with no cord. Other options include a Flood Light system that plugs into the wireless system and a Solar Charging Panel so you’ll never have dead batteries.
VSD LIFT MODELS
VSD3800 Ideal for medium-sized fishing boats, runabouts, ski boats and small to medium sized pontoons
VSD5000 Great for medium to large fishing boats, jet boats, runabouts, smaller ski/wakeboard boats and pontoons
VSD6000 Extra wide lift to give your larger boat more room when entering the lift
VSD6500 Great lift for today's large ski/wakeboard boats up to 5,525 pounds
VSD8000 For larger ski/wakeboard boats and cruisers up to 6,800 pounds
VSD10000 Works well for 10' wide pontoons and large cruisers
Pontoon Lifts Longer and wider lifts for today's larger pontoons
VSD5000 Pontoon For pontoons up to 4,250 pounds
VSD6500 Pontoon For pontoons up to 5,525 pounds
VSD8000 Pontoon For pontoons up to 6,800 pounds
12 Volt or Manual Winches
FLOE’s 12-volt DC electric boat lift winch lets you easily raise and lower your boat or pontoon with the push of a button. It includes a wired remote with 30′ cord that has a key switch allowing you to turn off the lift when you are away.
This system offers exceptional value compared to other power boat lift winch systems and includes a battery box with a built-in Battery Conditioner Indicator.
There’s also a manual winch with a crank wheel option that fits all FLOE vertical winch boat lifts. This heavy-duty gear-reduced winch features an automatic load-holding brake, a large easy-to-crank wheel with a speed knob, and a strong 5/16″ flexible stainless cable.
Vertical Winch Lift Models
V-2000 Ideal for small to medium fishing boats, runabouts and jet boats
V-2602 Double PWC lift
V-3600 For smaller boats and pontoons up to 3,060 pounds
V-4600 Handle a variety of fishing boats, runabouts, ski boats, jet boats and pontoons up to 3,910 pounds
Easy-Level™ Leveling System
All FLOE vertical boat lifts come standard with the patented Easy-Level™ system. There’s no need to get wet when adjusting the lift to the perfect height and a cordless drill is all that’s needed! Simply turn the nut inside the leg to adjust the lift up or down.
Other great benefits of the FLOE Easy-Level™ system are:
- Infinite adjustment
- No pins to align
- One-person job
- Easy seasonal adjustment as water levels fluctuate
Bunk Lift Options
Full-Length Bunk
All of FLOE’s boat bunks are made from strong aluminum extrusions and equipped with an interlocked vinyl cushion that contours to boat hulls. This boat lift bunk ensures a long-lasting, maintenance-free surface that will not scratch your watercraft.
Pontoon Full-Length Bunk/Guide-in System
Ideal for water depths of three feet and greater, this all-in-one bunk and guide system is built with an aluminum frame with maintenance-free vinyl guides. The extended bunks guide the pontoon to a perfect landing every time. The bunks lift the boat by the frame, not the pontoons, eliminating any scratching or denting.
Pontoon Cradle Pad Bunk/Guide-in System
This is the ideal choice for water depths as low as 2 feet. Four pairs of 25-inch aluminum framed bunks with maintenance-free vinyl surfaces hold pontoons safely and securely. Optional guides can be added and can be adjusted horizontally to provide effortless landings.
Vertical Lift Accessories
Perfect-Park™ Guide-In System
The ultimate boat lift parking system comes standard with 4 pairs of guide-in bumpers. The track along the top lets you slide the guides anywhere to position them perfectly for your style of boat. Additional guides are easy to add if needed.
There are separate systems for V-hull boats and for pontoons. V-hull boat systems include 4 pairs of guides with 4 guides on each side. The pontoon Perfect Parks include 2 guides for each side and two guides on each side of the curved entry that helps guide you into the lift.
Pro-Park™ Vertical Guide-In System
Pro-Park™ offers a “can’t miss” entrance guide-in system. It starts to guide your craft 20” prior to the boat entering the boat lift and again as you enter the lift. Works best with double guides on the entry and single guides at the front of the lift.
The system guides the boat by its rub rail so it never mars or touches the hull. Maintenance-free PVC guide tubes are covered by SDP fabric. The aluminum structure is adjustable horizontally to perfectly fit the width of your boat.
Precision-Park™ Horizontal Guide-In System
These full-length carpeted horizontal guides have vertical entry bumpers for smooth initial contact and two additional vertical bumpers for final contact with your boat’s rub rail for perfect alignment. The guides can be adjusted vertically and horizontally to accommodate most boat types.
Wireless Remote
The wireless remote works with the electric winch and VSD vertical boat lifts to offer an easy and convenient way to remotely raise and lower your boat lift. Features a range of up to 300 feet. It can be used to operate the boat lift and also an optional exterior LED flood light kit. Includes 2 remote key fobs.
Solar Panel
FLOE’s solar charging kit includes a trickle charger and keeps your battery charged all summer. It is available with one panel for 12 V systems and two panels for 24 V systems.
Motor Stop
A motor stop halts your boat in the same location every time and keeps your boat from floating too far through the boat lift. The aluminum framework with its vinyl bumper is positioned to keep your lower unit 27 inches away from the lift cradle.
Bow Stop
Park right on the money, every time. Connects to the dock in front of your lift and is adjustable to fit a boat or pontoon.
Bow Flex
PVC tubes flex forward as the boat touches them perfectly positioning your boat in the lift every time. Works great for inboards or where a motor stop isn’t the right solution. Two models available – one attaches to the side of the dock and the other connects to your boat lift with telescoping tubes making it adjustable for any length boat. Not intended to be used as a stop for your boat.
Deep Water Leg Kits
Includes two inner legs and bracing (1 pair). The inner leg is 48” longer than the current leg and has 30” of adjustment. The optimum water depth with Deep Water Leg Kits is 74”-114”. Boat lifts with deep water leg kits & canopies require 4 anchors.
Anchoring System
FLOE’s anchoring system is the ideal way to secure your boat lift to the lake bottom and help keep your boat safe when those inevitable storms come your way. The brackets attach to the lower frame of your lift. An extension post with augers allow you to install them from above the water line. Sold in pairs but 2 pair are recommended.
Boat Lift Step
Enter your boat easier. Slip-proof, adjustable.
Float & Roll™ Boat Lift System
The ideal system if your boat hoist needs to be floated long distances, floated into a slip, floated into deeper water, installed in muddy bottoms, or if you just want an easy way to get your lift in the water. You can even install and level your lift without getting wet or straining a muscle.
The system incorporates a set of four wheels with two floats making it easy to just roll the boat lift into the water and float it into place. The floats are adjustable to accommodate all sizes of FLOE boat lifts.
Boat Lift Wheel Kits
Boat Lift Wheel Kits allow you to roll your boat lift in and out without any heavy lifting. The airtight wheels each provide about 60 pounds of flotation to lighten the lift while moving it in the water. And you can leave the wheels on the lift while it is in the water. Two pairs of wheel kits recommended for easy in/out installation and removal.